F-3L single layer glass reactor product introduction
F-3L single-layer glass reactor adopts 304 stainless steel inner tank, spray-coated outer casing with universal casters for easy movement; with 220V/120W~250W variable frequency AC induction motor, no carbon brush, no spark; frequency conversion The speed controller has digital display function, the mixing plug is sealed with PTFE mechanical ceramic composite, the lower discharge valve adopts the PTFE inner core with good air tightness and corrosion resistance, and the inner stainless steel stirring rod is used to outsource the PTFE inner core stainless steel stirring paddle.
F-3L single layer glass reactor product details:
F-3L single layer glass reactor features:
1. The material used in the glass reactor (G3.3 borosilicate glass) has excellent material and chemical properties. In the mixing process of the frequency conversion speed regulation, it will be relatively stable, even if the torque is large, no spark will be generated.
2. In addition, the components are sealed with PTFE, which can maintain a good vacuum (generally around -0.095mpa) in the same kind of products in the market, and maintain high-precision sealing under working conditions. There is also a debris collection tank.
3, alloy steel mechanical seal, Teflon joint, to maintain high-precision sealing under working conditions.
4, Pt100 sensor probe, high temperature measurement accuracy, small error, effectively improve work efficiency.
5, PTFE discharge valve, movable interface, completely and quickly.
6. The cooling or heating solution of the glass reactor interlayer can be completely discharged after the reaction is completed, and no liquid is accumulated.
7. The whole stainless steel column mobile frame structure, five reaction kettle lids, complete glass with reflux, liquid addition and temperature measurement.
8, strong torque, no noise. Japanese technology AC gear reduction motor used.
9. Double-tetrafluoroethylene stirring paddle for glass reactor, suitable for mixing and mixing of low to high viscosity liquid.
F-3L single layer glass reactor product maintenance:
1. Check the instrument carefully before use. Whether the glass bottle is damaged or not, and whether the interfaces are consistent, pay attention to light handling.
2. Wipe each interface with a soft cloth (can be replaced with a napkin) and apply a small amount of vacuum grease. (The vacuum grease must be covered after use to prevent the entry of sand.)
3. The interfaces of the glass reactor should not be tightened too tightly. It should be loosened regularly to avoid the long-term tight lock and cause the connector to bite.
4. Turn on the power switch first, then let the machine run from slow to fast. When the machine is stopped, stop the machine and turn off the switch.
5, the PTFE switch everywhere can not be tightened too much, easy to damage the glass.
6. Every time you use it, you must wipe off all kinds of oil stains, stains and solvents left on the surface of the machine with a soft cloth and keep it clean.
7. Loosen the PTFE switches after stopping, and the PTFE piston will be deformed when it is still working for a long time.
8. Regularly clean the sealing ring by removing the sealing ring and checking if there is dirt on the shaft. Wipe it with a soft cloth, then apply a little vacuum grease and reinstall it to keep the shaft and seal ring smooth.
9, the electrical part must not enter the water, it is strictly prohibited to get wet.
10, must purchase the original authentic accessories, free use of other accessories can cause fatal damage to the machine.
11. When making any repairs or inspections on the glass reactor, be sure to cut off the power supply and water source.
We have won the praise of the new and old customers with advanced production technology, reliable product quality, reasonable price, good reputation and considerate service.
The product packaging is complete, choose the most powerful logistics express, the delivery is fast, the appearance is beautiful and generous, to ensure that the product can be completely received by the customer.
After sales service
24 Hours online service for your consult.
Help choose right model,and a series of service,person,advise. Middle service
--Give you best offer
--Provide discount for many sets order
--Do customer's request:
--Choose payment term you convienent.
--Promptly production and delivery,inform you in time.
--Can provide invoice value as you like to decrease your tax. After sale service
--1 year warranty service and all life maintenance.
--Technical Egineer are avalible for oversea trainning.
--Free change for some parts
--Remote control technical consult
--Free installation DVD
GET A QUOTE