explosion proof glass reactor

Explosion-proof glass reactor manufacturers provide you with explosion-proof glass reactor price, explosion-proof glass reactor customization.

  • Place of Origin:, Henan
  • Custom processing:Yes
  • Brand:ZZKD
Explosion-proof glass reactor product introduction

The explosion-proof glass reactor uses explosion-proof motors, explosion-proof cables and explosion-proof governors, and is equipped with touch buttons. The structural design and parameter configuration of the container can be carried out according to different process conditions. The design conditions, process, inspection and manufacturing, and acceptance should be based on relevant technical standards to achieve the heating, evaporation, cooling and low-speed mixing reaction functions required by the process. .

The biggest difference between the explosion-proof glass reactor and the ordinary glass reactor is that there is an explosion-proof device. The explosion-proof glass reactor adopts the full explosion-proof motor, explosion-proof inverter and full explosion-proof intelligent temperature control box to meet the explosion-proof standards of modern biological, chemical and pharmaceutical experiments and production. What are the precautions for explosion-proof glass reactors compared to ordinary glass reactors?
1. As with ordinary glass reactors, carefully read the product manual carefully before using the explosion-proof glass reactor. If you have a certain understanding of the product, you will not be confused when using it.
2. The power supply voltage should be consistent with the requirements;
3. The temperature and humidity of the working environment of the explosion-proof glass reactor should be well grasped. The life of the electrical box has a great relationship with them, so keep the motor dry;
4. The glass is fragile. When using the explosion-proof glass reactor, try to remove the jewelry from the body to avoid damage to the glass.
The explosion-proof glass reactor greatly guarantees the safety of the experiment. It can carry out the stirring reaction under normal pressure or negative pressure conditions, and can be used for distillation and reflux of the reaction solution. It is a modern fine chemical, biopharmaceutical and new material synthesis. Ideal equipment.
Whether it is an explosion-proof glass reactor or a common glass reactor, the operation method is the same. Also pay attention to the maintenance during use, and follow the specifications to extend the service life of the instrument.

Explosion-proof glass reactor product details

 


 

Features of explosion-proof glass reactor:

1. Explosion-proof frequency control, explosion-proof motor, constant speed, no brush, no spark, safe and stable, can work continuously;
2. The supporting glass is made of GG-17 high borosilicate material, which has good chemical and physical properties; the large bottle mouth design can be extended into the hand to clean;
3, PTFE mechanical components sealed, proprietary technology, can maintain the market similar products zui good vacuum;
4, the smallest or no dead angle PTEE discharge valve, solid material / liquid material can be easily released from below;
5, constant temperature digital oil bath, intelligent PID adjustment, accurate temperature control; overall structure is beautiful, easy to operate;

Explosion-proof glass reactor notes:

1. Please familiarize yourself with the contents of this manual before installing, using, maintaining and inspecting the explosion-proof glass reactor.
2. The power supply voltage of the explosion-proof glass reactor must be the same as that specified in the instrument.
3, no load is not suitable for high speed operation
4, the life of the electrical box and the surrounding temperature, the impact of humidity is great. Please keep the speed and the motor dry.
5, first install the explosion-proof glass reactor and then by the professional electrician wiring, power. The ground terminal must be grounded. The high temperature bath must be connected to the open switch.
6. Within 5 minutes after the power is turned off, there may still be electric shock due to the discharge of the inverter or capacitor.
7. Pay attention to the impact damage of the hard object (watch, ring, belt buckle, etc.) on the glass during the operation.
8. Pay attention to the impact damage of the hard object (watch, ring, belt buckle, etc.) on the glass during the operation.
9. Be careful when connecting the vacuum tube water pipes to avoid excessive damage to the human body caused by the glass.
10, need to use high temperature circulating oil bath, pay attention to the high temperature damage to the human body, we recommend the use of small heat transfer oil (dimethicone, kinematic viscosity of 100) as a solvent. In particular, when paying attention to high temperature circulation, the circulating pump should be turned on first to allow the heat transfer solvent to circulate, and then slowly heat up.

Warranty & Service:

Pre-service
24 Hours online service for your consult.
Help choose right model,and a series of service,person,advise. 
Middle service
--Give you best offer
--Provide discount for many sets order
--Do customer's request:
--Choose payment term you convienent.
--Promptly production and delivery,inform you in time.
--Can provide invoice value as you like to decrease your tax. 
After sale service 
--1 year warranty service and all life maintenance.
--Technical Egineer are avalible for oversea trainning.
--Free change for some parts
--Remote control technical consult
--Free installation DVD
--Maintenance plan
Glass reactor manufacturer introduction
GET A QUOTE
Our company's explosion-proof glass reactors are available in 1L, 2L, 3L, 5L, 10L, 20L, 30L, 50L, 80L, 100L and can be customized to meet special requirements. The explosion-proof glass reactor reactor (tank) can carry out various solvent synthesis reactions under constant temperature conditions. The reaction part of the instrument is a steerable and completely sealed structure. It can continuously inhale various liquids and gases by negative pressure, or it can be made at different temperatures. Reflux or distillation.

Q: What is the difference between an explosion-proof glass reactor and a common glass reactor?

A: The biggest difference between the explosion-proof glass reactor and the ordinary glass reactor is that there is an explosion-proof device.
The explosion-proof glass reactor adopts the full explosion-proof motor, explosion-proof inverter and full explosion-proof intelligent temperature control box to meet the explosion-proof standards of modern biological, chemical and pharmaceutical experiments and production.
The explosion-proof glass reactor greatly guarantees the safety of the experiment. It can carry out the stirring reaction under normal pressure or negative pressure conditions, and can be used for distillation and reflux of the reaction solution. It is a modern fine chemical, biopharmaceutical and new material synthesis. Ideal equipment.
Whether it is an explosion-proof glass reactor or a common glass reactor, the operation method is the same. Also pay attention to the maintenance during use, and follow the specifications to extend the service life of the instrument.